Fire Stick Remote Not Working? How to Fix It
Most Fire TV remotes start working again after fresh batteries and one re-pair: hold the Home button for about 10 seconds within 10 feet of the Fire TV. If that does nothing, restart the Fire TV by unplugging it for 60 seconds, then reset the remote with Amazon’s button combo: Left, Menu and Back together for 12 seconds.
The short version: Put in new AAA batteries. Hold Home for 10 seconds. Still dead? Unplug the Fire TV for 60 seconds and reset the remote with Left + Menu + Back for 12 seconds.
Start With the Batteries
Weak batteries are behind most dead Fire TV remotes. The remote can still light up and yet fail to send anything. Amazon recommends AAA alkaline batteries for the best results; rechargeables and cheap cells often have too little voltage for the remote.
Take the back cover off, replace both batteries, and try again.
Read the Remote’s Light
Many Fire TV remotes have a small light at the top. It blinks blue when the remote pairs. Newer remotes also have a troubleshooting mode: hold Rewind and Right together for 3 seconds, then press Menu. The light then tells you what’s wrong:
- Blue: the remote is fine. Restart the Fire TV.
- White: check the Fire TV is on, then restart it.
- Orange: the remote isn’t paired. Go to the re-pair step below.
- Slow red blink: batteries are low.
- Fast red blink: something’s wrong with the remote. Reset it (below).
Some remotes, including the basic ones, have no light at all. In that case, skip ahead.
Restart the Fire TV
A frozen Fire TV ignores every remote. If the remote still half works, hold Select and Play/Pause together for about 5 seconds to restart it. If not, unplug the Fire TV Stick or Fire TV Cube from power, wait 60 seconds, and plug it back in. On a Fire TV smart TV, unplug the TV from the wall.
Pair the Remote Again
- Stand within 10 feet (3 m) of the Fire TV.
- Hold Home for about 10 seconds.
- When the TV says “Press Play/Pause to start”, or the light blinks blue, it’s paired.
If nothing happens, restart the Fire TV first. When it starts up and shows that it can’t detect your remote, hold Home for 10 seconds again.
A Fire TV can pair with up to seven remotes and game controllers. If you’re at seven, remove one before adding another.
Reset the Remote
When pairing fails, reset the remote. This is Amazon’s method for most Fire TV remotes:
- Unplug the Fire TV from power and wait 60 seconds.
- Hold Left, Menu (three lines) and Back together for 12 seconds.
- Let go and wait 5 seconds.
- Take the batteries out of the remote.
- Plug the Fire TV back in and wait until it says it can’t detect your remote.
- Put the batteries back in and press Home.
- If the light blinks blue, you’re done. If not, hold Home for 10 seconds.
Two older remotes are different:
- Alexa Voice Remote (1st generation), the one with a mic button but no power or volume buttons: same steps, but hold Left and Menu for 12 seconds.
- Basic Edition Remote, with no voice button: hold Home and press Menu three times, let go of Home, then press Menu nine times. Take the batteries out, unplug the Fire TV for 60 seconds, put the batteries back, plug the Fire TV in, and hold Home for 40 seconds once the home screen appears.
If you’re not sure which you have, try the Left + Menu + Back reset first. It’s the one for nearly every recent remote.
Use the HDMI Extender
A Fire TV Stick plugged straight into the back of the TV sits behind a big sheet of metal and electronics. That can weaken the remote’s signal and the Wi-Fi. Amazon puts a short HDMI extender in the box. Use it, so the stick hangs away from the TV. If your stick goes into an HDMI switch or hub, try it straight in the TV.
Cut Down Interference
Fire TV remotes use Bluetooth, so they don’t need to point at the stick. They can still be thrown off by distance, a metal cabinet, or nearby gadgets like a wireless speaker, a router or a microwave. Move closer, take the stick out of any enclosed cabinet, and try again.
When Power and Volume Don’t Work
The power, volume and mute buttons control your TV, not the Fire TV. If those are the only buttons that fail, set them up under Settings › Equipment Control, and make sure HDMI-CEC is on in your TV’s settings. Samsung calls it Anynet+, LG calls it SimpLink, and Sony calls it Bravia Sync.
Use Your Phone in the Meantime
While the remote is out of action, your phone can stand in. Amazon’s Fire TV app works as a remote, and so does Remora, a universal remote for iPhone that works with Fire TV Sticks, the Fire TV Cube and Fire TV smart TVs running Fire OS. Both need your phone on the same Wi-Fi as the Fire TV. Remora pairs once with a 4-digit PIN on the TV; if it doesn’t show up, see Fire TV PIN not showing.
The Fire TV page has the pairing steps and the TV settings to check.
This also covers Fire TV smart TVs from brands like Insignia and Toshiba. Their remotes reset the same way.
When to Replace the Remote
If the light never comes on with fresh batteries, or the remote won’t pair after a full reset, it has likely failed. Amazon sells replacements; pick one that lists your Fire TV model. Until it arrives, your phone keeps the TV usable.
Questions
Why is my Fire TV remote light blinking orange?
In the remote's troubleshooting mode, orange means the remote isn't paired. Restart the Fire TV, wait until the TV shows that it can't detect your remote, then hold Home for 10 seconds.
How many remotes can a Fire TV pair with?
Up to seven, counting game controllers. If seven are already paired, remove one under Settings › Controllers & Bluetooth Devices before pairing another.
Can I use my phone as a Fire Stick remote?
Yes. Amazon's Fire TV app works as a remote, and Remora does too on Fire TV devices running Fire OS. Your phone and the Fire TV must be on the same Wi-Fi.
Why does the volume button on my Fire TV remote not work?
Volume and power buttons control the TV, not the stick. They need the TV set up under Settings › Equipment Control, or HDMI-CEC turned on in the TV's settings.