How to Turn On a Roku TV Without the Remote
Every Roku TV has a power button on the TV itself. On most it’s under the bottom centre, behind the small status light, or on the back near the lower left or right corner; press it once and the TV turns on. For next time, switch on Fast TV Start under Settings › System › Power, so your phone or a voice assistant can turn the TV on over Wi-Fi.
The short version: Feel under the bottom centre of the TV, behind the status light, and press the button there. If it’s not there, check the back near the lower corners. Then turn on Fast TV Start so your phone can do it next time.
Roku TV or Roku Player?
First, check what you have, because the answer is different.
- A Roku TV has Roku built in. TCL, Hisense, onn., Sharp, Philips, Westinghouse and others make them, and Roku makes its own Select and Pro Series TVs. The Roku home screen appears as soon as the TV turns on, and the TV has its own power button.
- A Roku streaming stick or player plugs into a TV’s HDMI port. It has no off switch: it stays on and goes idle. When the screen is dark, it’s the TV that’s off, so you turn on the TV (with its own button or remote) and switch it to the Roku’s HDMI input.
The rest of this guide is mostly about Roku TVs. If you have a player, skip to Turn It On Over HDMI.
Find the Button on a Roku TV
The button is small and often hidden, but Roku says to check these places first:
- Under the bottom centre of the TV, behind the status light. This is the most common spot on TCL and many other Roku TVs. The button faces down, so feel for it under the frame.
- On the back panel, near the lower left or lower right corner. Common on some Hisense and onn. models, though it varies by model.
- On the right side panel. Roku Pro Series TVs have a power button there, with a Find My Remote button above it.
If you still can’t find it, run your hand along the bottom, sides and top edge. The model number on the label on the back tells you which manual to look up on the maker’s site.
How the Buttons Work
Roku TVs use a few button layouts:
- One button. Press it to turn the TV on. With the TV on, a press opens the inputs menu, and further presses move through it.
- Three buttons. The middle one opens the inputs menu; the others move through it.
- A small joystick. Push it left or right to open the inputs menu.
- A column of labelled buttons on older models, including Power and Input.
Some Roku TVs have only a power button and nothing else.
Press, don’t hold. On some Roku TVs, holding the TV’s buttons for 10 to 12 seconds starts a factory reset, which wipes your settings and apps.
Turn It On From Your Phone
A phone can turn a Roku TV on over your home Wi-Fi, but only while the TV stays on the network in standby. That’s what Fast TV Start does.
- On the TV, go to Settings › System › Power › Fast TV Start.
- Check the box to turn it on.
- Leave the TV plugged in. A TV switched off at the wall, or on a smart plug, can’t be woken.
Roku says Fast TV Start uses more power in standby. Without it, a Roku TV drops off the network after it’s been off for a while, and no phone app can wake it.
Phone apps also need Control by Mobile Apps set to allow them. Go to Settings › System › Advanced System Settings › Control by Mobile Apps › Network Access and choose Enabled. Since Roku OS 14.1 the default is Limited, which blocks remote buttons from apps. Our page on Roku’s Limited setting explains it. Change both settings now, while you have a working remote or the TV’s button handy.
Then use Roku’s own mobile app, or Remora, a universal remote for iPhone that works with Roku TVs from any maker and with Roku streaming players. Your iPhone and the TV must be on the same Wi-Fi. The Roku page lists what works and how to pair. If the app can’t find the TV, it’s usually the network; see TV not found on Wi-Fi.
Turn It On Over HDMI
HDMI-CEC lets devices on HDMI turn each other on. Roku calls it Control Other Devices (CEC).
On a Roku TV: go to Settings › System › Control Other Devices (CEC) and turn on 1-Touch Play. Then turning on a game console, cable box or soundbar connected by HDMI switches the Roku TV on and changes to that input. Turn on HDMI control on the other device too.
With a Roku streaming player: on the player, go to Settings › System › Control Other Devices and turn on TV Power and 1-Touch Play. Turn on CEC on your TV as well; TV makers give it other names, like Anynet+ on Samsung and SimpLink on LG. Now pressing a button on the player, or the power button in a phone app, can turn the TV on.
Plug the stick’s power into a wall outlet. Roku warns that a phone app may not be able to turn the TV on if the stick is powered from the TV’s USB port, because the stick turns off with the TV.
Turn It On With Your Voice
Roku works with Amazon Alexa and Google Assistant. Link your Roku in the Alexa or Google Home app. On a Roku TV, voice power-on also needs Fast TV Start: with it on, “Alexa, turn on bedroom Roku” switches the screen on.
If Nothing Turns It On
- Look at the status light. No light at all usually means no power. Try another outlet.
- Unplug the TV, wait 30 seconds, plug it back in and press the TV’s button once.
- If the remote is the real problem, our guide to fixing a Roku remote covers batteries, pairing and resets. Roku TVs from TCL and onn. work the same way.
Questions
Do all Roku TVs have a power button?
Yes. Every Roku TV has at least a power button on the TV. Some have a single button, some have three, some have a small joystick, and Roku Pro Series TVs have buttons on the right side panel.
Why won't the Roku app turn my Roku TV on?
Usually Fast TV Start is off, so the TV leaves the network after it's been off for a while. Turn it on under Settings › System › Power. Also check the TV is plugged in and your phone is on the same Wi-Fi.
Does Fast TV Start use more power?
Yes. Roku says it uses more power in standby than the normal setting, because the TV stays partly awake so it can start quickly and answer the network.
How do I turn on my TV with a Roku streaming stick?
A Roku player can turn the TV on through HDMI-CEC. Turn on CEC in the TV's settings, then on the Roku go to Settings › System › Control Other Devices and turn on TV Power and 1-Touch Play. Power the stick from a wall outlet, not the TV's USB port.