Roku Remote Not Working? How to Fix It
Most Roku remotes come back to life with fresh batteries and a restart of the Roku: take the batteries out, unplug the Roku for 5 seconds, plug it back in, then put the batteries back. If you have a voice remote, pair it again by holding its pairing button for 5 seconds right after the Home screen appears. A simple remote never needs pairing, so if it’s dead, the problem is batteries or line of sight.
The short version: Put in new batteries. Unplug the Roku for 5 seconds and plug it back in. If it’s a voice remote, hold the pairing button for 5 seconds as soon as the Home screen shows.
First, Check Which Roku Remote You Have
Roku makes two kinds of remote, and they fail in different ways.
- Simple remote. No microphone, no voice button. It works by infrared, like an old TV remote, so it has to point straight at the Roku player or Roku TV. It doesn’t pair, so there’s nothing to re-pair.
- Voice remote. It has a microphone or a magnifying glass button. Many voice remotes connect wirelessly, so you can point them anywhere. They pair with the Roku, and a lost pairing is the most common reason they stop working. Some are rechargeable, like the Voice Remote Pro.
If you’re not sure, look for the mic or the voice button. That decides which of the steps below matter.
Fix the Batteries
Weak batteries cause more dead remotes than anything else, and a remote can work on and off for weeks before it dies.
- Take both batteries out.
- Press any two buttons. This clears the remote.
- Put in a fresh, matching pair. Don’t mix an old battery with a new one.
On a voice remote, put the batteries in negative end first. On a rechargeable remote, plug it in with the cable that came with it, into a USB charger or a computer.
If the remote feels hot, stop using it. Don’t pull out hot batteries. Set it on a hard surface like tile and let it cool first.
Once a voice remote is working again, you can see its battery level under Settings › Remotes & Devices › Remotes, then pick your remote and open About.
Restart the Roku
A Roku that’s stuck won’t answer any remote. Unplug the Roku TV or streaming player from power, wait 5 seconds, plug it back in and wait for the Home screen. This also puts the Roku into pairing mode for a moment, which you need for the next step.
Pair a Voice Remote Again
Pairing only works when the remote and the Roku are both in pairing mode at the same time. The restart above handles the Roku side.
- Restart the Roku and wait for the Home screen.
- Find the pairing button. It’s on the back of the remote or under the battery cover.
- Hold it for 5 seconds, until the light on the remote flashes.
- Wait for the pairing message on the TV.
No pairing button? Hold Back and Home together for 5 seconds instead.
If the light doesn’t flash at all, the remote probably needs new batteries or a charge.
If you have a second remote, or a phone app, you can pair from the menu too: Settings › Remotes & Devices › Add Devices › Remote, then follow the steps on screen.
Reset a Rechargeable Remote
If a rechargeable voice remote won’t pair, give it a full reset.
- Hold the pairing button for 20 seconds. No pairing button? Hold Back and Home for 20 seconds.
- Wait for the light to stop flashing.
- Charge it for at least 5 hours with its own cable.
- Pair it again as above.
Check Line of Sight and Interference
A simple remote needs a clear path to the front of the Roku. If your player is behind the TV, inside a cabinet or blocked by a soundbar, move it or try different angles.
Voice remotes don’t need line of sight, but other electronics and distance can still get in the way. Try again from closer.
A Roku streaming stick plugged straight into the back of the TV can lose the remote’s signal, because the TV itself blocks it. Roku offers a free HDMI extender for this. It lets the stick hang a few inches away from the TV, which often fixes a remote that works only up close.
Check the Stick’s Power
Plug a Roku streaming stick into a wall outlet with its own power adapter where you can. A TV’s USB port may not give it enough power, and some sticks have their wireless receiver built into the USB power cable, so use the cable that came in the box.
Update the Roku
If some buttons on a voice remote work and others don’t, update the Roku: Settings › System › System Update › Check Now. Then set up TV control again under Settings › Remotes & Devices › Remotes › Set Up Remote for TV Control.
If power and volume don’t control the TV, point the remote at the TV. If that works, those buttons use infrared. If it doesn’t, turn on CEC (HDMI control) in your TV’s settings.
Use Your Phone While You Sort It Out
You don’t have to stop watching while you fix the remote. Roku’s own mobile app works as a remote, and so does Remora, a universal remote for iPhone that works with Roku TVs and Roku streaming players over your home Wi-Fi. Your iPhone and the Roku need to be on the same Wi-Fi.
One setting matters for any phone remote: if buttons from your phone are ignored, Control by Mobile Apps is probably set to Limited. Our guide on fixing Roku’s Limited control setting shows where to change it. For pairing steps and what works, see Remora with Roku.
If your Roku is a TV and it’s switched off, a phone can turn it on only when the TV stays on the network in standby. Here’s how to turn on a Roku TV without the remote.
When to Replace the Remote
If a simple remote still does nothing with new batteries and a clear line of sight, or a voice remote won’t pair after a full reset and a 5-hour charge, the remote has likely failed. Roku sells replacements, including for Roku TVs made by TCL and Hisense. Check that the one you pick lists your TV or player. Until it arrives, your phone does the job.
Questions
Why does my Roku remote light flash but nothing happens?
A flashing light usually means the remote is trying to pair. Restart the Roku by unplugging it for 5 seconds, then hold the pairing button for 5 seconds as soon as the Home screen appears, so both are in pairing mode at the same time.
Can I pair a Roku remote without a working remote?
Yes. Unplug the Roku for at least 5 seconds and plug it back in. When it starts up it looks for a remote, so you can pair from the remote itself without going through any menu.
Why do volume and power work but nothing else, or the other way round?
Many voice remotes control the Roku over a wireless link but control the TV's power and volume with infrared or HDMI-CEC. Point the remote at the TV to test volume. If that doesn't help, turn on CEC in the TV's settings and set up TV control again under Settings › Remotes & Devices.
How do I check my Roku remote's battery?
On a paired voice remote, go to Settings › Remotes & Devices › Remotes, pick your remote and open About. It shows the battery level.