Apple TV Remote Not Working? 7 Fixes to Try
Most Siri Remotes that stop working just need a charge, a restart or a fresh pairing. Charge it for 30 minutes, then hold TV/Control Center and Volume Down for about 5 seconds to restart it. If that doesn’t work, hold Back and Volume Up for 5 seconds, close to the Apple TV, to pair it again.
The short version: Charge the remote for 30 minutes. Restart it with TV/Control Center and Volume Down. Re-pair it with Back (or Menu) and Volume Up, held for 5 seconds about 3 inches from the Apple TV. Meanwhile, your iPhone’s Control Center has an Apple TV remote built in.
First, Which Remote Do You Have?
Apple has made several remotes, and the buttons differ a little. Apple’s own guide to identifying them sorts them like this:
| Remote | Looks like | Charges with |
|---|---|---|
| Siri Remote (1st generation) | Black, glass touch surface, Menu button | Lightning |
| Siri Remote (2nd generation) | Silver aluminium, clickpad, Back button | Lightning |
| Siri Remote (3rd generation) | Silver aluminium, clickpad, Back button | USB-C |
| Siri Remote (4th generation) | Silver aluminium, clickpad | USB-C (needs tvOS 26.6.1 or later) |
| Apple Remote (aluminium or white) | Small, Menu and Play buttons, round ring | CR2032 coin battery |
In countries without Siri, the same remotes are called Apple TV Remote. If you have the old aluminium or white Apple Remote, the fix is usually a new coin battery. Apple has separate pairing steps for those.
1. Charge It Properly
Siri Remotes have a built-in battery, so there’s nothing to swap. Apple’s advice is to charge for 30 minutes from a USB wall charger, not a TV’s USB port, which often gives too little power. Use a USB-C cable for the USB-C remotes and a Lightning cable for the older ones. To see the battery level, go to Settings › Remotes and Devices › Remote on the Apple TV.
2. Restart the Remote
- Press and hold TV/Control Center and Volume Down together for about 5 seconds, until the status light on the Apple TV turns off and on.
- Let go and wait 5 to 10 seconds. You may see a Connection Lost alert on the TV.
- Press any button. If Remote Connected appears, you’re done. If not, pair it again.
3. Pair the Remote Again
- Point the remote at the Apple TV from about 3 inches (8 cm) away.
- Press and hold Back and Volume Up for 5 seconds. On the black 1st-generation remote, use Menu instead of Back.
- If the TV asks, put the remote on top of the Apple TV to finish.
If pairing fails, move on to restarting the Apple TV, then try again.
4. Restart the Apple TV
Unplug the Apple TV from the wall, wait 6 seconds, and plug it back in. If you can reach the menus another way (your iPhone, below), you can also choose Settings › System › Restart. Then pair the remote again.
5. Check Distance and What’s in the Way
The Siri Remote talks to the Apple TV over Bluetooth, so it doesn’t need a clear line of sight to the box. On tvOS 18 and later, Settings › Remotes and Devices › Remote shows a signal indicator. If it’s weak, Apple suggests staying within about 20 feet (6 metres) and clearing things between the remote and the Apple TV, TV, receiver or soundbar. An Apple TV tucked behind the TV or inside a metal cabinet can lose the signal.
6. Volume or Power Not Working? Check Home Theater Control
If the remote moves around menus but won’t change the TV’s volume or turn the TV on, the Apple TV is fine. Those two buttons control your TV through infrared or HDMI control (CEC). Look under Settings › Remotes and Devices: turn on Turn On Your TV with Your Remote and set Volume Control to Auto. The TV’s own HDMI control setting needs to be on too. Samsung calls it Anynet+, LG calls it SimpLink, and Sony calls it Bravia Sync.
7. Update or Reset the Apple TV
A remote newer than the Apple TV’s software won’t pair until tvOS is updated. The 4th-generation Siri Remote, for example, needs tvOS 26.6.1 or later. Check under Settings › General › About, and update from Settings › System › Software Updates using your iPhone as the remote. A full reset (Settings › System › Reset) is the last resort. It erases your settings and accounts, so try everything above first.
Use Your iPhone While the Remote Is Out
iPhone has an Apple TV remote built in. On iOS 18 and later, open Control Center, tap Add Controls, then Add a Control, search for Remote and add it. Then:
- Make sure your iPhone is on the same Wi-Fi as the Apple TV.
- Tap the Apple TV Remote button in Control Center and choose your Apple TV.
- If the TV shows a 4-digit code, type it on your iPhone.
It gives you a touch area, Back, play and pause, and the iPhone keyboard for typing. One limit: Apple says its volume buttons only work when the Apple TV plays through a HomePod, soundbar or other AirPlay speaker. Otherwise you need your TV’s remote for volume.
A third-party remote app can fill that gap, and using your iPhone as a TV remote explains how they connect. Remora works with Apple TV 4K and Apple TV HD, pairs with a 4-digit PIN, and can control the TV itself too, so the Apple TV and your Samsung, LG or Roku TV sit in the same app. The Apple TV page lists the settings to check, and if no code shows up, see Apple TV PIN not showing.
Still Not Working?
If a fully charged remote won’t pair with an Apple TV that’s up to date and has been unplugged, the remote itself may have failed. Contact Apple Support or get a replacement Siri Remote; any current one pairs with Apple TV 4K and Apple TV HD using the same Back and Volume Up steps.
Questions
How do I know which Siri Remote I have?
The black remote with a glass touch surface is the 1st generation and has a Menu button. The silver remotes with a clickpad are the 2nd, 3rd and 4th generation and have a Back button. The 2nd generation charges with Lightning; the 3rd and 4th use USB-C. Apple TV shows the details under Settings › Remotes and Devices › Remote.
Why do only the volume buttons not work?
The Siri Remote changes your TV's volume with infrared or HDMI control, not through the Apple TV. Check Settings › Remotes and Devices › Volume Control on the Apple TV, and make sure nothing blocks the line between the remote and the TV or soundbar.
Can I use my iPhone as an Apple TV remote without Wi-Fi?
No. Apple says your iPhone must be on the same Wi-Fi network as the Apple TV for the Control Center remote to work.
Can I control my Apple TV if I lost the remote?
Yes. The Apple TV Remote in iPhone's Control Center does almost everything the Siri Remote does. A third-party remote app on the same Wi-Fi works too. You can also buy a new Siri Remote and pair it with Back and Volume Up.