Google TV Remote Not Working? How to Fix It

Updated 18 November 2026

A Google TV remote that stops responding usually needs its batteries reseated, a restart of the streamer, or a fresh pairing. Take the batteries out and put them back while you watch the light on the front. Then unplug the Chromecast or Google TV Streamer for 1 minute, and if the remote still does nothing, pair it again with Back and Home.

The short version: Reseat or replace the two AAA batteries. Unplug the streamer for 1 minute. Pair the remote again (Back and Home for 3 seconds on a Chromecast remote). If only power and volume fail, set them up again under Settings › Remotes & Accessories.

Which Remote Do You Have?

“Google TV” covers three kinds of device, and the steps differ a little:

  • Chromecast with Google TV. A small puck on a cable behind the TV, with an oval Voice Remote.
  • Google TV Streamer. Google’s newer box that sits beside the TV (2024 and later), with its own Voice Remote.
  • A TV with Google TV built in. Many Sony, TCL, Hisense and Philips TVs. These come with the TV maker’s remote, not Google’s.

Google’s remotes talk to the streamer over Bluetooth for menus and over infrared to the TV for power, volume and input. That split explains a lot of “half working” remotes.

1. Check the Batteries

Both Google Voice Remotes take two AAA batteries. Google suggests this check:

  1. Take both batteries out.
  2. Put them back while you watch the small light on the front, below the buttons.
  3. It should flash twice. If it doesn’t, try again, or use 2 fresh 1.5 volt AAA batteries.

Google asks for 1.5 volt batteries. Most rechargeable AAAs are 1.2 volts, so try ordinary alkaline ones if the remote acts up.

2. Restart the Streamer

Unplug the USB-C power cable from the Chromecast or Streamer, wait 1 minute, and plug it back in. Google recommends this for Bluetooth drops in particular. If you can still reach the menus, Settings › System › Restart does the same.

3. Pair the Remote Again

Chromecast with Google TV: If the remote doesn’t pair by itself after a restart, press and hold Back and Home for 3 seconds. The light pulses when it’s ready, and the TV shows the pairing steps.

Google TV Streamer: Press the button on the back of the Streamer. That opens the pairing screen, and the TV walks you through it.

Any Google TV, from the menu: Go to Settings › Remotes & Accessories › Pair remote or accessory, then put the remote into pairing mode as above. If you’ve lost the remote’s link completely, use your phone to reach this menu (see below).

4. Reset the Remote

A remote reset clears its pairing and its TV button setup. Afterwards, pair it again.

Chromecast Voice Remote:

  1. Take both batteries out and wait 5 minutes.
  2. Hold Home while you put the batteries back.
  3. Keep holding until the light turns on and stays solid, then let go when it starts to pulse.

Google TV Streamer Voice Remote:

  1. Press and hold Mute and the center button together.
  2. The light blinks white, and after about 10 to 12 seconds you hear a countdown sound.
  3. Keep holding until the light turns solid white.

If pairing still fails after a reset, Google suggests this order: open a phone remote, choose Pair remote or accessory on the TV, reset the remote again, and tap select on your phone when the remote shows up in the list.

5. Power, Volume or Input Not Working

If the remote moves around menus but won’t turn the TV on or change its volume, the Bluetooth side is fine. The problem is the infrared side, which talks to the TV directly.

  1. Make sure nothing blocks the line from the remote to the TV, such as a soundbar in front of the TV’s sensor.
  2. Go to Settings › Remotes & Accessories › Set up remote buttons.
  3. Choose your TV (or soundbar), then Set up buttons, and set up Volume, Power or Input again. The TV checks each code with you as you go.

If your TV supports HDMI control, turning it on in the TV’s settings can help too. Samsung calls it Anynet+, LG calls it SimpLink and Sony calls it Bravia Sync.

TVs With Google TV Built In

On a Sony, TCL, Hisense or Philips TV with Google TV, the remote is the maker’s own, so the pairing buttons and reset steps come from the TV’s manual. If buttons work but the mic or the pointer doesn’t, re-pair the remote from Settings › Remotes & Accessories. The Sony brand page says which Bravia models run Google TV.

Use Your Phone in the Meantime

You don’t have to wait for a new remote. Google’s Google Home app has a remote: open the app, tap your device, then tap Open remote. Your phone needs to be on the same Wi-Fi as the TV, and Google says an iPhone needs iOS 14 or later.

A universal remote app works as well. Remora controls every TV and streamer that runs Google TV or Android TV, including the Chromecast, and pairs once with the 6-character code the TV shows. Typing with your iPhone keyboard is much faster than the on-screen one. The Google TV page lists the TV settings that help, such as Remote Start on Sony TVs so the phone can turn the TV on.

Last Resort: Factory Reset the Streamer

If nothing above works, a factory reset of the Chromecast or Streamer puts it back to new. It erases your accounts, apps and settings, so you’ll set it up again from the start. On a Chromecast with Google TV, it’s under Settings › System › About › Factory reset. If even a reset remote won’t pair afterwards, the remote has probably failed, and a replacement Voice Remote pairs with the same steps.

Questions

Why does my Google TV remote work but not the volume?

The volume and power buttons control your TV with infrared, separately from the Bluetooth link to the streamer. Set them up under Settings › Remotes & Accessories › Set up remote buttons, and make sure nothing blocks the line from the remote to the TV.

How do I control Google TV without the remote?

Use your phone. Google's Google Home app has a remote for Google TV and Android TV devices on the same Wi-Fi. A universal remote app on your iPhone works too, once you pair it with the code the TV shows.

My TV has Google TV built in. Do these steps apply?

The menu paths do, but the remote is made by the TV's maker, such as Sony, TCL or Hisense, so its pairing and reset buttons differ. Check the maker's manual, then pair from Settings › Remotes & Accessories › Pair remote or accessory.

Do I need to factory reset the Chromecast?

Rarely. Resetting the remote and pairing it again fixes most problems. A factory reset of the Chromecast or Streamer erases everything on it, so keep it for last.